Industrial valves regulate fluid flow in piping systems. They are either manually operated or equipped with an actuator that changes the valve's opening and closing conditions. This is a key aspect of valve selection for the chemical processing indus...

In the automotive industry, the plastic valve has become the preferred material for many reasons. This is because it is highly resistant to heat, high temperatures, low thermal conductivity, and corrosive chemicals. In addition, the coil encapsulatio...

The plastic self-priming pump is designed to fill a piping on the discharge side with water. This forces the air out of the pump. In order to prime the pump, the outer fan blades of the motor should be rotated three to four times in reverse. The dis...

A Globe Valve is a valve with a sphere-shaped body and a stationary ring seat. The disk completely closes the seat, thereby stopping or starting fluid flow. The disk is raised or lowered by turning the handle, either manually or through an actuator. ...

Industrial valves regulate fluid flow in piping systems. They are either manually operated or equipped with an actuator that changes the valve's opening and closing conditions. This is a key aspect of valve selection for the chemical processing indus...

A Diaphragm Valve is a simple, low-cost mechanical valve. Depending on the type of application, diaphragms can be made of fluorine plastic, rubber, or elastomers. These materials are usually corrosive-resistant and are durable enough to withstand hig...

The plastic valves and pipes are important to the control of fluid flow in pipes. They are also easy to install and can be fitted with hydraulic or pneumatic actuators. These valves are suitable for gas and liquid flow applications in general industr...

A Ball Valve is a valve with a cylindrical sealing surface. This type of valve is commonly made of plastic to achieve a high sealing performance with zero leakage. It has several advantages over other valve types. One of them is that they are fast to...

There are many options available in globe valve construction. There are metal, alloy, and plastic models. Proper selection depends on the media, concentration, and temperature. It may be helpful to consult with the manufacturer to determine the best ...

PPH Pipe Fittings are made of b-modified ordinary PP. Their fine Beta crystal structure ensures high chemical and wear resistance, good temperature resistance, and good insulating properties. In addition, PPH pipes can withstand a wide range of press...

A variety of plastic materials are used to make Plastic Valve Pipe. These are great options for chemical and corrosion-resistant applications. They are also tough, flexible, and UV-resistant. There are three common types of PP for industrial use: chl...

The operating principle of a ball valve is based on the physics of friction. A sphere/ball in a floating state rotates between two valve seats. The flow passageway aligns with the ball during open/close operation. This principle gives a smooth flow a...