China Industrial Plastic Valves Pipe Manufacturers,Chemical Plastic Valves Pipe Suppliers Service Hotline : +86 574-86116777 E-mail : kxpv@kxpv.com
When some media that are easy to precipitate and contain solid particles are adjusted by ordinary valves, they are often blocked at the throttle and guide, and the gas and steam can be flushed at the bottom of the lower ...
The flow-opening type flows toward the opening direction, and the cavitation and erosion mainly act on the sealing surface, so that the sealing surface of the valve core and the valve seat is quickly damaged; the flow-cl...
By increasing the diameter of the valve to increase the working opening, the specific methods are as follows: 1. Change the valve of a small first diameter, such as DN32 to DN25; 2. The valve body does not change, replac...
1. Large opening work extended life method Let the regulator work as far as possible at the maximum opening, such as 90%. Thus, cavitation, erosion, and the like occur on the head of the spool. As the spool is broken, th...
The action of the regulating valve is unstable. The symptoms and causes are as follows: 1. The air source pressure is unstable. A. The compressor capacity is too small; B. The pressure reducing valve is faulty. 2. The si...
When the regulating valve is made of graphite-asbestos, the lubricating oil should be added to the packing for about three months to ensure the flexibility of the regulating valve. If it is found that the packing pressur...
Address: No. 539, Bohai Road, Beilun, Ningbo, Zhejiang, China 315800
Mobile: +86 18067123173
Landline: +86 574-86116777
Fax: +86 0574-86140635
QQ: 1310217272
E-mail: kxpv@kxpv.com